Used Framing Equipment:  Mat Cutters, Moulding Cutting & Joining Equipment, Mounting Presses, Hand Tools

We buy & sell pre-owned picture framing equipment. We also help you to sell your used framing equipment, and help you save on equipment that you may need. All Items are sold "As Is".  Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to crosscheck information with seller or manufacturer regarding descriptions that appear in this catalog.

Do you have Questions?  Feel free to our office at 330-405-9421, M-F, 10AM-5PM EST or Email us at info@skylinepictures.com

                      Pre-owned Framing Equipment     page 67     

Section 2: Frame Moulding Cutting, Joining Equipment, Miter Saws (Note: newest listings appear on latter pages)

Skip to Page:  #1 -  #2  -  #3  -  #4  #5 -  #6 -  #7 -  #8 -  #9  #10 -  #11  #12  #13 -  #14 -  #15 -  #16 -  #17 -  #18 - #19 -  #20  -  #21 -  #22 -  #23  #24  #25 - 

#26 -#27  #28  #29  #30 -  #31 -  #32 -  #33  #34 -  #35 -  #36  #37  #38 -  #39 -  #40 -  #41  #42 -  #43 #44 -  #45  #46  #47 -  #48  #49 -  #50 -  #51 - 

#52  #53 -  #54 -  #55 -  #56  #57  #58  #59  #60 -  #61 -  #62-  #63 #64-  #65 #66 #67 #68-  #69 #70-  #71-  #72 #73-  #74-  #75 #76-  #77-  #78 - #79 -#80 -

-#81 -#82 -#83 -#84  -#85 -#86 -#87 -#88 -#89 -#90 -#91 -#92 -#93 -#94 -#95 -#96 -#97 -#98 -#99 -#100 -#101 -#102 -#103 -#104 -#105 -#106 -#107 -#108 -#109 -

#110 -#111 -#112 -#113 -#114 -#115 -#116 -#117 -#118 -#119 -#120 -#121 -#122 -#123 -#124 -#125 -#126 -#127 -#128 -#129 -#130 -#131 -#132 -#133 -#134 -#135 -#136 -#137 -#138 -#139 -

#140 -#141 -#142 -#143 -#144 -#145 -#146 -#147 -#148 -#149 -#150 -#151 -#152 -#153 -#154 -#155 -#156 -#157 -#158 -#159 -#160 -#161 -#162 -#163 -#164 -#165 -#166 -#167 -#168 -#169

-#170 -#171 -#172 -#173  -#174  -#175 -#176 -#177 -#178 -#179 -#180 -#181 -#182 -#183 -#184 -#185 -#186 -#187 -#188 -#189 -#190 -#191 -#192 -#193 -#194 -#195 -#196 -#197 -#198 -#199

-#200-#201 -#202 -#203 -#204 -#205 -#206 -#207 -#208  -#209 -#210 -#211 -#212 -#213 -#214 -#215 -#216 -#217 -#218 -#219 - #220  -#221- #222-#223-#224-#225-#226-#227-#228-#229-#230-

-#231-#232-#233-#234-#235-#236-#237-#238-#239-#240-#241-#242-#243-#244-#245-#246-#247-#248-#249 -#250-#251-#252-#253-#254-#255-#256-#257-#258-#259-#260-#261-#262-#263

-#264-#265-#266-#267-#268-#269-#270-#271-#272-#273-#274-#275-#276-#277-#278-#279-#280-#281-#282-#283-#284-#285-#286-#287-#288-#289-#290-#291-#292-#293

-#294-#295-#296-#297-#298-#299-#300-#301-#302

All Items On This Page are Sold - See Latter Pages For Newest Listings

   List price $2,900  

 ***Reduced***Item # UFE-1289   $ 1,250

Full Image

Frame Square Mitre Saw

Model 4000 (Rabbit Saw)

Standard 1/2 HP, Light Use, No Extra Baldes, New Blade Recommended

Serial #R-504  Manufactured in 1982

Manufacturer's website: Parts / manuals for this machine can be found at www.frame-square.com 

 

"From Manufacturer's website:" "10 blade Cuts all types of moulding up to 5 wide and almost 3.5 high.
A HP motor is standard and a 1 HP motor is optional.
Top measure stop allows for pre-cutting rails to length without swinging long pieces of moulding."

 

 

This item can be picked up in Minnesota, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Larry-MN-3-17-11

See Page #163 for Current Information    Return Home

   List price $2,900  

 ***Reduced*** Item # UFE-1290   $ 1,450

Full Image

Frame Square Mitre Saw  w/ stand

Model: 1000

Standard 1/2 HP, No Extra Blades, Average Use, New Blade

Serial #0939  Manufactured in 1981

Manufacturer's website: Parts / manuals for this machine can be found at www.frame-square.com 

 

"From Manufacturer's website:" "10 blade Cuts all types of moulding up to 5 wide and almost 3.5 high.
A HP motor is standard and a 1 HP motor is optional.
Top measure stop allows for pre-cutting rails to length without swinging long pieces of moulding."

 

 

This item can be picked up in Minnesota, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Larry-MN-3-17-11

See Page #163 for Current Information    Return Home

 

***Reduced***Item # UFE-1291   $1,995

Full Image

Delta Table Saw w/ Accessories

This machine is in Good Condition.

10" Contractor's Saw with 30" Unifence and Tenoning Jig

This item can be picked up in Ohio, or shipped for an additional fee by UPS. Shipping is not the $6.50 default found in the shopping cart.

Cleveland Hts-3-18-11

See Page #163 for Current Information   Return Home

   

 ***Reduced***Item # UFE-1292   $1,095

Full Image

Frame Square Mitre Saw

This unit is in Good Condition.

Manufactured in 1984  Serial #1302

The blade is good but is near time for sharpening. Table top of saw slides freely and very smoothly.

Manufacturer's website: Parts / manuals for this machine can be found at www.frame-square.com 

 

"From Manufacturer's website:" "10 blade Cuts all types of moulding up to 5 wide and almost 3.5 high.
A HP motor is standard and a 1 HP motor is optional.
Top measure stop allows for pre-cutting rails to length without swinging long pieces of moulding."

 

 

This item can be picked up in South Carolina, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Wanda-SC-3-18-11

MV-Sold-10-23-13   Return Home

 

$ 1,399 List Price

 Item # UFE-1293   $ 750

Full Image

INMES Underpinner

Pneumatic Underpinner

This machine is in Good Condition.

 

 

This item can be picked up in Washington, or shipped for an additional fee by UPS. Shipping is not the $6.50 default found in the shopping cart.

Rick-WA-3-21-11

JP-Sold-5-13-11      Return Home

$2,748 List Price

 

Item # UFE-1294   $795

Full Image

Mitre Mite VN2

Mitre Mite VN2 V-Nail Frame Assembly Machine

This unit is in Very Good Condition.

"From the seller: "VN2 Joiner is approximately 22 years old and has been in storage for about
20 years. It holds two different size fittings for the V-Nails." 

 

 

The following information is from the ITW AMP / Manufacturer's website:

The Mitre-Mite VN 2  is a bench top frame assembly machine and our most popular model with the Custom Framer. It is compact and well constructed, built for many years of trouble free operation. With this machine, the Framer sets the front and back stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails can be driven or stacked anywhere along the frame joint. Other features include a pneumatic load / feed system to eliminate jams, "soft clamp" pneumatics for damage free joints, and a "quick change" hold down to fit most profiles.

Specifications:
Machine Size: Width/12" , Length/19" , Height/14" , Weight/75lbs
Power Source: Pneumatic
Framing Capability: Frame Width 3/8" to 5" / Frame Height 1/4" to 5 1/4"
V-Nail sizes: 3,5,7,10,12,15 mm

This item can be picked up in Georgia, or shipped for an additional fee by UPS. Shipping is not the $6.50 default found in the shopping cart.

Alan-GA-3-21-11

JP-Sold- 4-1-11     Return Home

wpe3F.jpg (1396 bytes)Click Arrow For Next Page

RETURN TO FRAMING EQUIPMENT

CLICK HERE FOR AIM's CATALOG INDEX OF SKYLINE, STADIUM, AND SPORTS PRINTS - WHOLESALE SUPPLIER TO GALLERIES AND FRAME SHOPS 

We Accept: Visa/MasterCard/Discover/Debit/Certified Check or Money Order

 Produced By: A.I.M. Enterprises, Inc.    phone: 330-405-9421
(c) Copyright 2014 All rights in all media reserved.

 

Used Imnes Underpinner Frame Assembly Machine, Delta Table Saw with Accessories, Used Frame Square Mitre Saw Model 1000 for Sale, Used FrameSquare Mitre Saw, Used Picture Framing Equipment for Sale, Ebay Craigslist Used Frame Square Mitre Saw, Pre-Owned Used Frame Square Mitre Saw to Cut Moulding Frames for Frame Shops Art Galleries, Framing Tools, Used Parts Part, Used Blade Blades Motor, Buy Used Framing Frame Shop Equipment Store, Selling Sell Your Framing Equipment, Buy Used Framing Equipment, Discount Framing Equipment, AIM Enterprises Inc Dealer Distributor Supplier of Used Framing Equipment