Used Framing Equipment:  Mat Cutters, Moulding Cutting & Joining Equipment, Mounting Presses, Hand Tools

We buy & sell pre-owned picture framing equipment. We also help you to sell your used framing equipment, and help you save on equipment that you may need. All Items are sold "As Is".  Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to crosscheck information with seller or manufacturer regarding descriptions that appear in this catalog.

Do you have Questions?  Feel free to our office at 330-405-9421, M-F, 10AM-5PM EST or Email us at info@skylinepictures.com

                      Pre-owned Framing Equipment     page 54     

Section 2: Frame Moulding Cutting, Joining Equipment, Miter Saws (Note: newest listings appear on latter pages)

Skip to Page:  #1 -  #2  -  #3  -  #4  #5 -  #6 -  #7 -  #8 -  #9  #10 -  #11  #12  #13 -  #14 -  #15 -  #16 -  #17 -  #18 - #19 -  #20  -  #21 -  #22 -  #23  #24  #25 - 

#26 -#27  #28  #29  #30 -  #31 -  #32 -  #33  #34 -  #35 -  #36  #37  #38 -  #39 -  #40 -  #41  #42 -  #43 #44 -  #45  #46  #47 -  #48  #49 -  #50 -  #51 - 

#52  #53 -  #54 -  #55 -  #56  #57  #58  #59  #60 -  #61 -  #62-  #63 #64-  #65 #66 #67 #68-  #69 #70-  #71-  #72 #73-  #74-  #75 #76-  #77-  #78 - #79 -#80 -

-#81 -#82 -#83 -#84  -#85 -#86 -#87 -#88 -#89 -#90 -#91 -#92 -#93 -#94 -#95 -#96 -#97 -#98 -#99 -#100 -#101 -#102 -#103 -#104 -#105 -#106 -#107 -#108 -#109 -

#110 -#111 -#112 -#113 -#114 -#115 -#116 -#117 -#118 -#119 -#120 -#121 -#122 -#123 -#124 -#125 -#126 -#127 -#128 -#129 -#130 -#131 -#132 -#133 -#134 -#135 -#136 -#137 -#138 -#139 -

#140 -#141 -#142 -#143 -#144 -#145 -#146 -#147 -#148 -#149 -#150 -#151 -#152 -#153 -#154 -#155 -#156 -#157 -#158 -#159 -#160 -#161 -#162 -#163 -#164 -#165 -#166 -#167 -#168 -#169

-#170 -#171 -#172 -#173  -#174  -#175 -#176 -#177 -#178 -#179 -#180 -#181 -#182 -#183 -#184 -#185 -#186 -#187 -#188 -#189 -#190 -#191 -#192 -#193 -#194 -#195 -#196 -#197 -#198 -#199

-#200-#201 -#202 -#203 -#204 -#205 -#206 -#207 -#208  -#209 -#210 -#211 -#212 -#213 -#214 -#215 -#216 -#217 -#218 -#219 - #220  -#221- #222-#223-#224-#225-#226-#227-#228-#229-#230-

-#231-#232-#233-#234-#235-#236-#237-#238-#239-#240-#241-#242-#243-#244-#245-#246-#247-#248-#249 -#250-#251-#252-#253-#254-#255-#256-#257-#258-#259-#260-#261-#262-#263

-#264-#265-#266-#267-#268-#269-#270-#271-#272-#273-#274-#275-#276-#277-#278-#279-#280-#281-#282-#283-#284-#285-#286-#287-#288-#289-#290-#291-#292-#293

-#294-#295-#296-#297-#298-#299-#300-#301-#302-#303-#304-#305

All Items On This Page are Sold - See Latter Pages For Newest Listings

 

 

***Reduced***Item # UFE-1211   $795

Full Image

Dewalt 12" Compound Mitre Saws w/ Phaedra Miter-Grid

This machine is in Very Good Working Condition.

Dewalt 12" Saws / Phaedra Measuring System as shown.

Framers  measuring Phaedra System with Dewalt 12" Mitre saw  D.B compound

See page #119 for Current Information

 

This item can be picked up in the Connecticut, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

LIZ- CT-1-20-11

JP-Sold-2-10-12   Return Home

(VN42 List price new $4,687)

Item # UFE-1212   $ 1,800

Full Image

ITW / AMP  Mitre- Mite VN42 Underpinner

ITW Pneumatic Under-pinner / V-Nailer / frame assembly machine

It is in Good Condition.

Manufactured: about 2005

Following info / specifications are from manufacturer's or Distributors website:

The Mitre-Mite VN 42 has been designed for ease of operation and is particularly well suited for assembling larger frames. This machine comes with a height adjustable base and has a convenient tilt / roll feature which allows for easy movement around the shop. it can be operated from the front or back and has a dual stage foot pedal which allows the Framer to see if the corner is properly aligned before nailing. After the Framer sets the stops, the hand lever is then used to position the nail head for driving or stacking V-Nails anywhere along the frame joint.

Specifications:

  • MACHINE SIZE:
    • Width 14"
    • Length 19"
    • Height 33" to 43"
    • Weight 150 lbs.
  • POWER SOURCE: Pneumatic
  • FRAMING CAPABILITY:
    • Frame Width 3/8" to 5 1/2"
    • Frame Height 1/4" to 41/2"
    • Tilt/Angle fence for custom fit
    • 4 , 6, or 8 sided frames.
  • V-NAIL SIZES: 3, 5, 7, 10, 12, 15 mm
  • OPTIONAL ACCESSORIES:
    • Wood support table
    • Metal extension wings

This item can be picked up in the South Carolina, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Lee-SC-1-18-11

Sold Lee - 1-30-11    Return Home

List $658+

Item # UFE-1213   $350

Full Image

ITW Model 12" Disc Sander

Provides true corners...

This sander is in Very Good Condition.

 

 

This item can be picked up in the South Carolina, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Lee-SC-1-18-11

Sold Lee - 1-30-11      Return Home

List $1,590

***Reduced***Item # UFE-1214   $650

Full Image

Frame Square Manual Joiner

This joiner is in Good Condition.

This item can be picked up in the New York, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Jim-NY-1-27-11

Manufacturer's Information (for current generation):

(check with manufacturer for any differences between unit being offered and current generation machine)

comes with floor stand, cartridge v-nail feed & optional top with support bracket.

Ideal for small to medium production, Frame Square  Jiffy Joiner model 1700 is designed to join frames with manual operation. No air or electricity needed.

 

Frame Square Model 1700 “Jiffy Joiners” are built with precision to give the tightest and most  accurate corner joints available. Using four sizes of v- type nail fasteners, but no electricity or air, our joiners force the rails together for an extremely tight corner.  Another 4th corner solution.

•  No air or electricity required
•  Zero set up time (no stops to set)
•  Knee operated rabbet clamp permits
   precise alignment of frame parts
   before driving the v-nail fasteners .
•  Rabbett clamp acts as a great vise.
•  Joins all profiles
•  Nails can be stacked
•  Inexpensive to own
•  Cam operated driver for effortless
   insertion of v-nail in soft or hard woods.
•  V-type nails held in metal cartridges for
   ease of loading and size changes.
•  Standard unit can mount to existing
   work bench and be set level or at an
   optimal  angle.   
•  Rabbet clamp actuated by knee pad,
   locks in over-center position for positive
   holding of corner until you release it.

 

Specifications:
Moulding range = 3/8” to 2-7/8” high x 3/8 to 3” wide
Frame size = 2” x 2” smallest,  unlimited for largest.
Machine size = 22” deep x 10” wide x 13”
Nail cartridges for 1/4”, 3/8”, 1/2” and 5/8” height nails

 Sold-2-6-12-Jim   Return Home

List Price $265

***Reduced***Item # UFE-1215   $130

Full Image

Frame Square Fillet Cutter / Trimmer

This unit is in Good Condition.

Precision Fillets / Trim Cutter for Fillets

 

See page #119 for Current Information

This item can be picked up in the New York, or shipped for an additional fee by UPS. Shipping is not the $6.50 default on the order page.

Jim-NY-1-27-11

 Sold-7-16-13-Jim    Return Home

$2,748 List Price

Item # UFE-1216   $800

Full Image

ITW AMP Mitre Mite VN2+1

Mitre Mite VN2+1  V-Nail Frame Assembly Machine

This unit is in Good Working Condition. Included are extra boxes of nails. Additional padding was added to prevent scratches on moulding.

Manufactured: between 1990 - 1996

 

The following information is from the ITW AMP / Manufacturer's website:

The Mitre-Mite VN 2+1 is a bench top frame assembly machine and our most popular model with the Custom Framer. It is compact and well constructed, built for many years of trouble free operation. With this machine, the Framer sets the front and back stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails can be driven or stacked anywhere along the frame joint. Other features include a pneumatic load / feed system to eliminate jams, "soft clamp" pneumatics for damage free joints, and a "quick change" hold down to fit most profiles.

Specifications:
Machine Size: Width/12" , Length/19" , Height/14" , Weight/75lbs
Power Source: Pneumatic
Framing Capability: Frame Width 3/8" to 5" / Frame Height 1/4" to 5 1/4"
V-Nail sizes: 3,5,7,10,12,15 mm

This item can be picked up in Missouri, or shipped for an additional fee by UPS. Shipping is not the $6.50 default found in the shopping cart.

Laurie-MO-1-28-11

No Longer Available  Return Home

wpe3F.jpg (1396 bytes)Click Arrow For Next Page

RETURN TO FRAMING EQUIPMENT

CLICK HERE FOR AIM's CATALOG INDEX OF SKYLINE, STADIUM, AND SPORTS PRINTS - WHOLESALE SUPPLIER TO GALLERIES AND FRAME SHOPS 

We Accept: Visa/MasterCard/Discover/Debit/Certified Check or Money Order

 Produced By: A.I.M. Enterprises, Inc.    phone: 330-405-9421
(c) Copyright 2015 All rights in all media reserved.

 

ITW AMP VN42 Pneumatic V-Nailer Under-pinner frame assembly machine, ITW Disc Sander For Sale, ITW Model 12" Inch Disc Sander Framing Equipment for True Corners, Used Dewalt 12 Inch Compound Mitre Saw with Phaedra Measuring System Mitering Grid, Used 12 Inch Dewalt Compound Miter Mitre Saw with Miter Clearmount Phaedra Measuring System Mitre Grid for Sale, Used Manual Frame Framing Joiner Underpinner V-nailer, Craigslist Ebay FrameSquare Jiffy 1700 Manual Joiner for Art Frame Shops, ITW Mitre Mite VN2+1 V-Nail V-Nailer Frame Assembly Machine, Used Picture Framing Equipment for Sale, Pre-Owned Used Frame Square Mitre Saw to Cut Moulding Frames for Frame Shops Art Galleries, Framing Tools, Used Parts Part, Used Blade Blades Motor, Buy Used Framing Frame Shop Equipment Store, Selling Sell Your Framing Equipment, Buy Used Framing Equipment, Discount Framing Equipment, AIM Enterprises Inc Dealer Distributor Supplier of Used Framing Equipment